浏览 https 类网站问题

新手入门、经验交流

Moderator: cre

Forum rules
  • 软件自带帮助是最好的入门教程,请仔细阅读;在您掌握最基本知识前,我们没法帮助您
  • 提问前请先查阅软件帮助文件和论坛相关讨论
  • 查阅软件帮助和论坛相关讨论即可解决的问题帖将直接删除,以免浪费他人时间
  • 请学会如何提问,尽量将问题描述清楚,不明确的提问将被直接删除
Post Reply
test
Posts: 22
Joined: Jan 17 2008, 06:18

浏览 https 类网站问题

Post by test »

睡之前再发个帖子询问下,本来想自己研究的;可该去开睡,也没时间了 :(

浏览需 SSL 认证的网站,如何把一些这类https的网站加入到安全名单中?比如 gmail, DRL 之类的网站,也就是不出现下面那图的提示。sidki 规则中又有没特定的规则文件对此进行设定的?
Attachments
Snap1.gif
Snap1.gif (11.44 KiB) Viewed 7684 times
Ray4
Moderator
Posts: 65
Joined: Dec 30 2007, 09:37

Re: 浏览 https 类网站问题

Post by Ray4 »

sidki的规则我没用,不知道是否有相应的文件。但在他的帮助里提到过的,因为https的地址一般是带port的,如
gmail.google.com:443/,这样的,所以你要在bypass里写入
gmail.google.com:
注意有冒号,这是通用方法。好像还提到过half-ssl,这个我没仔细看,LZ可以研究一下。

另外要说的是,gmail里是有广告的,所以要过滤https的gmail,直接bypass上面那个地址不行的(因为我过滤gmail的广告是用的url kill,bypass了整个地址就过滤不了了),如果用文本替换的方式,我倒是没试过
test
Posts: 22
Joined: Jan 17 2008, 06:18

Re: 浏览 https 类网站问题

Post by test »

ok, thx. :lol:
User avatar
prox_starter
Posts: 2
Joined: Mar 31 2008, 18:21

Re: 浏览 https 类网站问题

Post by prox_starter »

使用的是firefox FoxyProxy扩展(推荐一下,我用过的最好的fx代理扩展,可以设置多代理软件,例如同时添加prox、tor,URLs模板支持方便自动对应代理使用)

我使用https 也有这个问题 原先的版本是从http://www.geocities.com/sidki3003/prox-ssl.html下载使用的 以为是SSL文件版本的问题 又从 http://www.slproweb.com/products/Win32OpenSSL.html 下载了最新Win32 OpenSSL v0.9.8g 解包了dll文后 在prox选项里启动时 提示信息大概为dll功能不能完整支持 编译算法有差异之类的

现在对https不启用 用起来也设什么问题 要是高手能解决这个问题让人期待
User avatar
prox_starter
Posts: 2
Joined: Mar 31 2008, 18:21

Re: 浏览 https 类网站问题

Post by prox_starter »

另外prox本身带有的zLib.dll的版本比较旧 为了稳定性
推荐更新一下
http://www.winimage.com/zLibDll/
ZLIB DLL Home Page
Ray4
Moderator
Posts: 65
Joined: Dec 30 2007, 09:37

Re: 浏览 https 类网站问题

Post by Ray4 »

如果你用sidki的规则,看看Config_Control.txt里,启用half-SSL即可解决

2.2 Use Half-SSL (off)
...............................................................................

If active, secure links (https://) get redirected or converted to a Proxomitron
URL command (http://https..).

Pro: You may save some time because Proxomitron doesn't need to re-encrypt
the document after filtering - and the browser doesn't need to decrypt
it.
You don't get a warning message in Mozilla and Opera, saying that
Proxomitron's certificate doesn't match the site in question.

Contra: The browser is completely unaware that it is dealing with a secure
page. All responsibility goes to Proxomitron. You may not feel
comfortable with this fact.

This option requires a URL-based Proxomitron command.
Do *not* check "Disable URL-based Proxomitron commands", under
"Config -> Access" in Proxomitron's main window.

Proxomitron *must* have access to the SSL DLLs. The browser's HTTPS proxy
setting will not matter when this technique is in effect.

More info:
The "Installation" chapter in the ReadMe.
Scott R. Lemmon's thoughts in Proxomitron's ReadMe.
Post Reply